VPC Private Networks
In the initial phase of the Leaseweb VPC, new Private Networks can be created or changed on request of the customer by Leaseweb Support.
This requires the following information to be submitted as a support request ticket to Leaseweb Support (https://kb.leaseweb.com/kb/support/support-contacting-customer-care/). In the same ticket you can also request these networks to be assigned to your Dedicated Servers.
Dear support,
Please create the following VPC Private Network(s) for my VPC environment
| Characteristic | Answers | Remarks/Notes |
|---|---|---|
| Type of Private Network | L2 (Isolated) / L3 (Routed) | Select either ‘L2’ or ‘L3’ |
| Action | Add / Update / Delete | Select the action to be performed |
| L2 Networks | ||
| VLAN ID | example: 1010 | number between 1 and 4096 |
| Region + Availability Zone | example: EU-West3, AZ-1 | example is for datacenter AMS-01 |
| Apply to Server(s) | example: 656565, 606560 | Server Equipment IDs |
| L3 networks | ||
| Subnet | example: 10.12.0.0/24 | RFC 1918 subnet specifications |
| Gateway address | example: 10.12.0.254 | |
| VLAN ID | example: 100 | number between 1 and 4096 |
| DHCP enabled | Yes/No | Select Yes or No |
| DHCP scope | example: 10.12.0.10-10.12.0.100 /24 | RFC 1918 compliant subnet. Default constraint /20 limit out of a /8 pool per VPC |
| DHCP reservations | example: MAC: 00:1A:2B:3C:4D:5E IP: 10.12.0.100 | Optional, provide MAC address + IP address |
| Apply to Server(s) | example: 656565, 606560 | Server Equipment ID(s) |
Restrictions
- L2 (Isolated) total maximum number of networks: unlimited (50 recommended maximum)
- L3 (Routed) total maximum number of networks: 5
Note: Isolated Layer-2 networks do not come with Leaseweb VPC DHCP services. You can assign and use any RFC1918 compatible CIDR in these networks or run your own DHCP server.
