Point-to-point connectivity services are data transport services between 2 Leaseweb data centers or network PoPs.
These services provide low latency connectivity that is reliable, secure, and cost effective. You can extend your private network across data centers without compromising on performance or security.
Point-to-Point Connectivity Services
Point-to-point connectivity services consist of:
- Metro Ethernet service
- Long-haul Ethernet service
- Metro Wave service
Metro Ethernet Service
Metro Ethernet service is a protected point-to-point service using Leaseweb's MPLS-based metro networks. This point-to-point connection can be used to connect 2 racks in 2 different data centers in the same metro area.
Data centers with Metro Ethernet Service and their bandwidth
Check between which data centers and network PoPs you can use the Metro Ethernet service to connect your racks.
| Location A | Location B | Bandwidth |
|---|---|---|
| AMS-01 | <=> AMS-02 | 1Gbps |
| AMS-01 | <=>AMS-10 PoP | 1Gbps |
| AMS-01 | <=>AMS-13 PoP | 1Gbps |
| AMS-01 | <=>AMS-14 PoP | 1Gbps |
| AMS-01 | <=>AMS-15 PoP | 1Gbps |
| AMS-01 | <=>AMS-16 PoP | 1Gbps |
| AMS-01 | <=>AMS-17 PoP | 1Gbps |
| AMS-01 | <=>AMS-19 PoP | 1Gbps |
| AMS-01 | <=>AMS-20 PoP | 1Gbps |
| AMS-01 | <=>AMS-21 PoP | 1Gbps |
| AMS-01 | <=>AMS-22 PoP | 1Gbps |
| AMS-01 | <=>AMS-23 PoP | 1Gbps |
| AMS-01 | <=>AMS-24 PoP | 1Gbps |
| AMS-01 | <=>AMS-25 PoP | 1Gbps |
| AMS-01 | <=>AMS-26 PoP | 1Gbps |
Long-Haul Ethernet Service
Long-haul Ethernet service is a protected point-to-point service using Leaseweb's MPLS-based global network. This point-to-point connection can be used to connect 2 racks in 2 different data centers in 2 different metro areas.
Data centers with Long-Haul Ethernet Service and their bandwidth
Check between which data centers you can use the Long-haul Ethernet service to connect your racks. This table also shows the bandwidth per data center that can be assigned to you.
| Location A | Location B | Bandwidth |
|---|---|---|
AMS-01 | <=> FRA-10 | 1Gbps |
SIN-11 | <=> HKG-10 | 100Mbps |
Metro Wave Service
Metro Wave service is an optical path (protected or unprotected point-to-point services) using Leaseweb's DWDM-based metro networks.This point-to-point connection can be used to connect 2 racks in 2 different data centers in the same metro area, providing higher bandwidth capacity then the Metro Ethernet service.
Data centers with Metro Wave service and their bandwidth
Check between which data centers and network PoPs you can use the Metro Wave service to connect your racks. This table also shows the bandwidth per data center that can be assigned to you.
| Location A | Location B | Bandwidth |
|---|---|---|
| AMS-01 | <=>AMS-02 | 10Gbps |
| AMS-01 | <=>AMS-10 PoP | 10Gbps |
| AMS-01 | <=>AMS-16 PoP | 10Gbps |
| AMS-01 | <=>AMS-21 PoP | 10Gbps |
| AMS-01 | <=>AMS-24 PoP | 10Gbps |
Guidelines for setting up Point-to-Point Connectivity Services
Cross connects are required in both data centers and are excluded from the point-to-point connectivity service price.
The network that will be created by point-to-point connectivity services should always be separate from the public network in each location.
Point-to-point connectivity services can be offered as a part of a total approved Leaseweb solution and not between network PoPs.
Ordering Point-to-Point Connectivity Services
Please contact sales@Leaseweb.com, your Account Manager, or call our offices.
Leaseweb Customer Portal features for Point-to-Point Connectivity Services
For the point-to-point connectivity services, the following features are available in the Customer Portal:
- Cancellation
- Data graphs (not applicable for Metro Wave service)