Point-to-point connectivity services are data transport services between 2 LeaseWeb data centers or network PoPs.

These services provide low latency connectivity that is reliable, secure, and cost effective. You can extend your private network across data centers without compromising on performance or security.

Point-to-Point Connectivity Services

Point-to-point connectivity services consist of:

  • Metro Ethernet service
  • Long-haul Ethernet service
  • Metro Wave service 

Metro Ethernet Service

Metro Ethernet service is a protected point-to-point service using LeaseWeb's MPLS-based metro networks. This point-to-point connection can be used to connect 2 racks in 2 different data centers in the same metro area.

Data centers with Metro Ethernet Service and their bandwidth

Check between which data centers and network PoPs you can use the Metro Ethernet service to connect your racks. 

Location ALocation BBandwidth
AMS-01<=>AMS-111Gbps
AMS-01/AMS-11<=>AMS-10 PoP1Gbps
AMS-01/AMS-11<=>AMS-12 PoP1Gbps
AMS-01/AMS-11<=>AMS-13 PoP1Gbps
AMS-01/AMS-11<=>AMS-14 PoP1Gbps
AMS-01/AMS-11<=>AMS-15 PoP1Gbps
AMS-01/AMS-11<=>AMS-16 PoP1Gbps
AMS-01/AMS-11<=>AMS-17 PoP1Gbps
AMS-01/AMS-11<=>AMS-19 PoP1Gbps
AMS-01/AMS-11<=>AMS-20 PoP1Gbps
AMS-01/AMS-11<=>AMS-21 PoP1Gbps
AMS-01/AMS-11<=>AMS-22 PoP1Gbps
AMS-01/AMS-11<=>AMS-23 PoP1Gbps
AMS-01/AMS-11<=>AMS-24 PoP1Gbps
AMS-01/AMS-11<=>AMS-25 PoP1Gbps
AMS-01/AMS-11<=>AMS-26 PoP1Gbps

 

Long-Haul Ethernet Service

Long-haul Ethernet service is a protected point-to-point service using LeaseWeb's MPLS-based global network. This point-to-point connection can be used to connect 2 racks in 2 different data centers in 2 different metro areas.

Data centers with Long-Haul Ethernet Service and their bandwidth

Check between which data centers you can use the Long-haul Ethernet service to connect your racks. This table also shows the bandwidth per data center that can be assigned to you.

Location  ALocation BBandwidth

AMS-01

<=> FRA-10

1Gbps

AMS-01

<=> SIN-11

100Mbps

AMS-01

<=> HKG-10

100Mbps

FRA-10

<=> SIN-11

100Mbps

FRA-10

<=> HKG-10

100Mbps

SIN-11

<=> HKG-10

100Mbps

 

Metro Wave Service

Metro Wave service is an optical path (protected or unprotected point-to-point services) using LeaseWeb's DWDM-based metro networks.This point-to-point connection can be used to connect 2 racks in 2 different data centers in the same metro area, providing higher bandwidth capacity then the Metro Ethernet service.

Data centers with Metro Wave service and their bandwidth

Check between which data centers and network PoPs you can use the Metro Wave service to connect your racks. This table also shows the bandwidth per data center that can be assigned to you.

Location ALocation  BBandwidth
AMS-01<=>AMS-1110Gbps
AMS-01/AMS-11<=>AMS-10 PoP10Gbps
AMS-01/AMS-11<=>AMS-16 PoP10Gbps
AMS-01/AMS-11<=>AMS-21 PoP10Gbps
AMS-01/AMS-11<=>AMS-24 PoP10Gbps

 

Guidelines for setting up Point-to-Point Connectivity Services

Cross connects are required in both data centers and are excluded from the point-to-point connectivity service price.

The network that will be created by point-to-point connectivity services should always be separate from the public network in each location.

Point-to-point connectivity services can be offered as a part of a total approved LeaseWeb solution and not between network PoPs.

Ordering Point-to-Point Connectivity Services

Please contact sales@leaseweb.com, your Account Manager, or call our offices.

LeaseWeb Customer Portal features for Point-to-Point Connectivity Services

For the point-to-point connectivity services, the following features are available in the Customer Portal:

  •  Cancellation
  •  Data graphs (not applicable for Metro Wave service)

 


 

 

  • No labels